Best products for your love one

6 Best Airflow PC Case in 2021 Reviews & Buying Guide

[ad_1]

Since you have decided to build a new PC for yourself, you must be looking out there for the best PC components possible. Apart from the PC’s performance, the way it would look on your desk matters a lot. For that, we suggest you to spend on a decent-looking PC case that not only looks good but also has good airflow to keep your PC components cool.

That said, in this article, we have come up with some of the best PC case options for you all that you can use for your upcoming PC build. But, before we show you the list, you must know about a few major facts to keep in mind while buying a new case for your PC:

  • Case Type: We can say case-type or case-size as they are basically the same things. Generally, a mid-tower is the most standard size which most people prefer as it’s the right size for an ATX motherboard build. However, if you want to build a smaller PC, you can look for other case types.
  • of Fans: For maintaining proper airflow in the PC case, it must have fans. While some brands offer pre-installed fans at the front and rear, the others might not. Apart from that, you should also check how many fan-mounts a PC case has so that you can purchase third-party fans and install them on your own.
  • Connectivity Ports: The front-panel connectors are yet another crucial thing to check in any PC case. Some PC cases come with a bunch of USB3.0 ports, while some only have both USB3.0 and USB2.0 ports. So, depending on how many ports you require, you can pick the PC case of your choice.

There are a few extra facts that you should know about PC cases, so we will cover them all in the detailed “Buying Guide” given below. Until then, let’s take you through the PC cases that we have shortlisted for you, and check what they have to offer you.

Best Airflow PC Case in 2021

Best Airflow PC Case Case Type No. of Fans Connectivity Ports Buy Now
Corsair 4000D Airflow PC Case Mid-Tower 2 x 120mm fans USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack Check On Amazon
Cooler Master H500 Airflow PC Case Mid-Tower 2 x 200mm , 1 x 120 mm fan 2x USB 3.0 ports, 2xUSB 2.0 ports, Microphone and Headphone jacks Check On Amazon
Phanteks Eclipse P300A Airflow PC Case Mid-Tower 1 x 120mm fan 2x USB 3.0, Microphone and Headphone jacks Check On Amazon
Montech X2 MESH Airflow PC Case Mid-Tower 2 x 140mm, 1 x 120mm fan 1x USB 3.0 port, and 2 USB 2.0 ports, audio jack Check On Amazon
Lain Li LAN2MPX Airflow PC Case Mid-Tower 2 x 140mm, 1 x 120mm fan USB 3.1 Type C port, and 2 USB 2.0 ports Check On Amazon
SilverStone Technology Airflow PC Case Mid-Tower 1 x 120mm fan 2x USB 3.0 ports, 1x USB 2.0, audio jack Check On Amazon

Best Airflow PC Case in 2021: Reviews

1. Corsair 4000D Airflow PC Case

Corsair 4000D Airflow PC Case

If you look out for gaming peripherals in the market, Corsair is surely a top-tier brand that actually manufactures some decent PC cases as well.

We have decided to give 1st position to this Corsair 4000D Airflow Tempered Glass Mid-Tower ATX PC Case since it’s highly durable and looks pretty aesthetic. The overall case weighs around 7850 grams, so you can guess how tough it actually is. Moreover, it’s a mid-tower with dimensions 17.83 x 9.06 x 18.35 inches. That said, you can use this case with motherboards of any form factor, it’s compatible with all Extended ATX, ATX, MicroATX, MiniATX types of motherboards.

The PC case is fairly spacious and can easily fit 6x 120mm or 4x 140mm cooling fans. Not only that, you can even use a 360mm radiator at the front and 280mm in the roof as well. Although this 4000D case from Corsair comes with 2 pre-installed 120mm fans, we recommend adding more fans to enhance the airflow. To make your PC build look tidy, it also has the CORSAIR RapidRoute cable management system at the backside. Speaking about the connectivity ports, this PC case offers you a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack.

Key Features:

  • Dimensions: 17.83 x 9.06 x 18.35 inches
  • 2x USB 3.0, Microphone and Headphone jacks
  • Supports Extended ATX, ATX, MicroATX, MiniATX motherboards
  • Tempered glass side panel
  • 4 slots for Storage Drives
  • USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack
  • 167mm CPU Cooler limit
  • Support for up to a 410mm GPU
  • Pre-installed 1x 120mm front fan, 1x 120mm rear fan
  • Can fit up to 6x 120mm fans or 4x 140mm fans

Pros:

  • The RapidRouter Cable Management system is quite helpful
  • Modern design
  • Extremely good build quality

Cons:

Buy Now From Amazon

2. Cooler Master H500 Airflow PC Case

Cooler Master H500 Airflow PC Case

Yet another good brand that you can look out for PC cases is Cooler Master. It offers a wide variety of PC cases, all of which are highly premium and have cool designs.

We decided to put this MasterCase H500 in the 2nd position in this list since it performs quite well when it comes to airflow. Thanks to the 200mm ARGB fans that come pre-installed in this case at the front, which in-take air. There’s another 120mm fan also included in the case that throws air outside to maintain a proper airflow inside the case. If we talk about its design, we liked the mesh-design plate at the front that provides sturdiness as well as helps to enhance the airflow at the same time. Just like the transparent front panel, you get a Tempered glass side panel that lets you showcase your expensive gaming hardware.

In the roof, there’s enough room to put in two extra 120mm fans if you want to increase the airflow further. Moreover, this mid-tower PC case is even compatible with a full-size ATX motherboard and all the other smaller sizes as well. It can easily fit up to a 167mm CPU cooler and 410mm Graphics Card also. At the top of the case, you get 2 USB 3.0 ports and 2 USB 2.0 ports, along with separate headphone and microphone jacks. The overall weight of the case is around 9.22 Kgs; thanks to the built-in handle at the top, you can pick it up easily.

Key Features:

  • Dimensions: 22.4 x 12.2 x 23.9 inches
  • 2x USB 3.0 ports, 2xUSB 2.0 ports, Microphone and Headphone jacks
  • Supports ATX motherboards
  • Tempered glass side panel
  • 4 slots for Storage Drives
  • ARGB lighting system
  • 167mm CPU Cooler limit
  • Support for up to a 410mm GPU
  • Pre-installed 2x 200mm fans, 1x 120mm rear fan

Pros:

  • Stylish design
  • ARGB colorful lighting
  • Plenty of room for hardware

Cons:

Buy Now From Amazon

3. Phanteks Eclipse P300A Airflow PC Case

Phanteks Eclipse P300A Airflow PC Case

Phanteks is a decent brand choice if you want to save some bucks as all its offerings are comparatively cheaper than the competition.

Speaking of the Phanteks Eclipse P300A PC Case, it truly deserves to be in 3rd place in this list because of its affordable pricing. The size of this case measures 15.9 x 7.9 x 18 inches, so it’s a decent mid-tower case. That said, it comes with 2 3.5 inches HDD slots and two optional 2.5 inches SSD brackets as well. In addition, there is a 200mm clearance for the PSU unit and a 355mm clearance for GPU and Motherboard. This much space is good enough to fit an ATX motherboard comfortably.

Speaking of the fans, it comes with one rear 120mm fan pre-installed. However, you can install either a 120mm or 140mm fan in the roof or 2x 140mm or 2x 120mm fans at the front also. If you are going to use radiators in your build, there’s 280mm clearance at the front and 120mm clearance at the back if you choose to remove the rear fan. If you are concerned about the I/O ports, it features 2x USB 3. 0, Microphone, Headphone, Power button, Reset button on the top.

Key Features:

  • Dimensions: 15.9 x 7.9 x 18 inches
  • 2x USB 3.0, Microphone and Headphone jacks
  • Supports ATX motherboards
  • Tempered glass side panel
  • 4 slots for Storage Drives
  • 167mm CPU Cooler limit
  • Pre-installed 1x 120mm rear fan
  • 280mm clearance at front panel, 140mm clearance at roof

Pros:

  • Dual USB 3.0 ports
  • Good Airflow
  • Sturdy and well-built

Cons:

Buy Now From Amazon

4. Montech X2 MESH Airflow PC Case

Montech X2 MESH Airflow PC Case

Next up, you can check out this affordable PC case from Montech in case you are on a budget and still wish to use a stylish case.

Although the design is pretty simple and straightforward, we personally liked the minimalist look of this case. The X2 Mesh case is specially designed for budget-oriented people as it comes with pre-installed dual 140mm fans at the front and a 120mm exhaust fan as well, which do have colorful rainbow lighting as well. The side panel has a huge tempered glass that gives a modern look to this case.

Since it’s a mid-tower PC case, it comfortably fits ATX size motherboards and even has plenty of room to fit 2x 2.5 inches SSDs, 2x 3.5 inches HDD, and a PSU up to 180mm can also fit easily. The roof has 240mm clearance, so you can either choose to use a radiator or 2x 120mm fans for improving the airflow. As far as connectivity ports are concerned, this case offers you 2x USB 2.0 ports, 1x USB 3.0 port, and separate jacks for Microphone and Headphone.

Key Features:

  • Dimensions: 14.9 x 7.5 x 17.6 inches
  • Supports ATX Motherboards
  • 2x 140mm fans, 1x 120mm rear fan pre-installed
  • Tempered Glass Side Panel
  • PSU clearance up to 180mm
  • 2x 2.5 inches SSD Drive bays
  • 2x 3.5 inches HDD Drive bays
  • Supports 2x Top 120mm fans, 2x Front 140mm fans, and 1x Rear 120mm fan
  • 1x USB 3.0 port, and 2 USB 2.0 ports, audio jack
  • 165mm CPU cooler limit

Pros:

  • Plenty of expansion slots available
  • Ideal for ATX motherboards
  • Pre-installed 3 fans

Cons:

  • Design is not very attractive

Buy Now From Amazon

5. Lain Li LAN2MPX Airflow PC Case

Lain Li LAN2MPX Airflow PC Case

Coming to the next PC case, it’s from Lain Li, a renowned brand that offers a wide variety of hardware for computer builds.

Talking particularly about the LAN2MPX LANCOOL II MESH Performance PC case, it has a pretty aesthetic design language which looks pretty cool, also because of the front mesh panel. The PC case already comes with two 140mm fans and a 1x 120mm exhaust fan at the rear pre-installed. The good part is that you can adjust the speed of these fans with the help of the Top IO 4 steps L M H PWM fan controller. Along with that, the I/O section also has a headphone/microphone combo jack, USB 3.1 Type C connector, and 2 USB 2.0 ports also.

In total, you can equip this PC case with a total of 6 fans. For the GPUs and motherboard, this LAN2MPX LANCOOL II MESH Performance PC case offers 280mm clearance, so you can easily fit in an E-ATX/ATX motherboard. In addition, there’s enough room for a CPU cooler up to 176mm. The special fact about this PC case is that you even get to mount the fans above the PSU section, and it comes with tempered glass panels on each side of the case.

Key Features:

  • Dimensions: 22.05 x 21.42 x 12.28 inches
  • 280mm Motherboard clearance
  • 4 steps L M H PWM fan controller
  • Headphone/microphone combo jack
  • USB 3.1 Type C port, and 2 USB 2.0 ports
  • 176mm CPU cooler limit
  • 2x 140mm fans, 1x 120mm rear fan
  • 6 fan mounts

Pros:

  • Tempered glass panels on both sides
  • Offers plenty of room
  • Comes with a Type-C port

Cons:

Buy Now From Amazon

6. SilverStone Technology Airflow PC Case

SilverStone Technology Airflow PC Case

Lastly, we have yet another Mid-tower PC case shortlisted for you that is offered by SilverStone Technology.

If you are looking for a PC case that actually stands out, its white color scheme actually looks quite good. At the front of the case, you will find a mesh grille with a honeycomb grille design that makes it look quite premium. Even the I/O section connectors are given at the front side which includes two USB 3.0 ports and one USB 2.0 port along with an audio jack. The case is actually easy to clean, thanks to the removable filters present on both the top and bottom of the case.

The case is perfectly suitable for motherboards of all form-factor. Inside the case, you get a total of 6 fan mounts so that you can fully customize it as you wish. You can choose to use 2x 140mm fans or 3x 120mm fans for the front panel. However, a 1x 120mm exhaust fan comes pre-installed in this case. It even has a 3.5 inches drive cage with 2.5 inches mount. Along with that, there are 3 additional 2.5 inches trays as well. The CPU cooler limit for this case is 165mm, which makes it one of the finest mid-tower.

Key Features:

  • Dimensions: 8.15 x 17.56 x 15.35 inches
  • 2x 140mm or 3x 120mm fan mounts for the front panel
  • 1x120mm Rear Fan
  • 1x 3.5 inches Drive bay
  • 4x 2.5 inches brackets
  • 165mm CPU cooler limit
  • 2x USB 3.0 ports, 1x USB 2.0, audio jack

Pros:

  • Heavy-duty Steel body
  • Highly durable and sturdy
  • Decent airflow

Cons:

Buy Now From Amazon

Buying Guide for the Best Airflow PC Case

While building a new PC, most people generally pay attention to buying the best PC components they can afford. Well, no matter how good components you pick, one thing is sure that they will heat up while you work on your powerful PC. We have seen many people facing throttling issues due to overheating, just because they didn’t invest in a good PC case.

To keep the PC temperatures under control, the case must have good airflow. However, most people overlook that fact and get a PC case that is not suitable for their PC build. Well, we won’t let that happen to you since we will discuss every fact that you should consider while buying a PC case. So, don’t forget to read this buying guide until the end.

Form-Factor

First of all, it should be clear in your mind that you are building a small PC, or a standard size PC will be good enough for you. PC cases do come in a variety of sizes such as Full-Tower, Mid-Tower, Mini-Tower, etc. Usually, the bigger the case you choose to pick, the more it will cost. Although the smaller cases are inexpensive, the PC components of that form factor will make a big hole in your pockets. That’s the reason people find mid-towers the best option to pick as they support all sizes of PC hardware, and are affordable too.

Build-Quality

Since a lot of expensive hardware is going to stay in the case, the quality of the case you choose should be top-notch as well. PC cases are mostly made of steel, with a few plastic panels here for the design. So, there shouldn’t be a problem finding a PC case with good build quality as we have already mentioned so many good options in the list. Apart from that, what you can look for in the design. The modern PC cases actually come with tempered glass side panels, which are delicate, but give your PC an amazing look, especially when you use some RGB LED strips inside the case.

Cooling Method

Mid-towers usually have good enough room on the inside to fit in all the PC hardware quite comfortably. However, that’s not enough to keep them cool. That said, you should always be checking the cooling method which the case supports. By default, you will see most PC cases use Air-cooling, that’s what fans are there for. However, if the PC case has good enough mounting options, you can, later on, convert your PC into a water-cooled system by installing combinations of fans and radiators.

Fan Support

As we said earlier, Mid-tower cases do have plenty of room on the inside. That said, if you feel like the pre-installed fans are not enough, you should look for a PC case that offers you plenty of fan mounts so that you can install more fans in the case. Generally, fans for PC cases do come in a variety of sizes such as 120mm, 140mm, etc. So, whenever you buy a new PC case, don’t forget to check how many fans the PC case can support and pay attention to fans’ size.

Connectivity Ports

Checking the connectivity ports on any PC case is quite an essential task, as the front-panel connectors allow you easy access to your computer while connecting devices like portable storage drives, headphones, etc. Since it’s not convenient to reach out to the back panel every time you plug in-and-out something from your PC, there should be a few connectivity ports available at the front panel for easy access. You can consider choosing the PC case that offers you USB3.0 ports since they offer much better transfer speeds. Apart from the USB ports, always make sure the PC case does have the headphone and microphone jack at the front as well.

PSU Clearance

Every PC case has a separate compartment at the bottom for the PSU, but how do you know if your PSU will fit in the case or not. Well, all you need to check is the measurements of the PSU unit and see if there’s enough room for it in the PC case. Most PC cases mention the PSU clearance like 200mm or 180mm, which means you can use a 200mm or 180mm PSU unit in this PC case respectively.

Drive Bays

Without a doubt, you will find drive bays for SSDs and HDDs in every PC case. So why is it so important to check? Well, what you need to check is actually the number of drive bays the PC case offers. In some cases, there is generally only one HDD drive bay which you should always avoid, as 1 drive bay is not enough.

Because once the hard drive gets full, you will have to replace it with a new one. However, if there are multiple bays, you can keep the full drive, and use the other one for storage. In this way, you can still access the content of the previous hard drive, and there’s no need to remove it. Similarly, check for the SSD brackets in the PC case, as you will surely need more than 1 if you are a heavy PC user.

Cooler Limit

Similar to the PSU clearance, the Cooler limit is yet another major thing to check. In case you are thinking of using a third-party CPU cooler, you should check the Cooler Limit of your PC case as it will tell you if the cooler will fit in the case or not. Generally, most mid-tower cases have about 160-180mm CPU cooler limits, depending on the case. So, always make sure to check if you are going to install a CPU cooler on your PC.

Conclusion

If you have reached so far in this article, we assume you have already checked out all the listed PC cases in the article and also read the buying guide by now. So, we assume you are currently deciding and picking up the best suitable PC case for yourself. We hope you are not having any difficulties or confusion related to anything about the PC cases as we have covered it all in the buying guide for you. Still, if you are confused about making the final decision. We have a few of our personal recommendations that you can choose to pick any day:

  • The Corsair 4000D Airflow ATX PC Case is one of our personal favorites because of its attractive white color and aesthetic design. The PC case comes with 2 pre-installed 120mm fans, and there’s room for more. It also offers you a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack at the front.
  • The Cooler Master MasterCase H500 ARGB Airflow PC Case is yet another good pick since it comes with 2 pre-installed 200mm fans at the front and a 120mm rear exhaust fan, so the airflow, in this case, is superior. Moreover, it has 2x USB 3.0 ports, 2xUSB 2.0 ports, audio jack at the front, so you won’t face any issues with this case either.
  • On the other hand, if you are on a budget, the Phanteks Eclipse P300A Airflow PC case will be best for you. It has an attractive full-metal mesh design at the front and offers you 2x USB 3.0 ports along with an audio jack at the front. Moreover, there’s room for 6 fans, out of which 1x 120mm fan comes pre-installed.

Make sure to share your thoughts in the comments section. You can also post any questions down there if you have any!

[ad_2]

Source link

We will be happy to hear your thoughts

Leave a reply

Ashlifedeals
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0